Installing a new toilet from scratch takes a good deal of plumbing expertise, but replacing a damaged or old-fashioned one with an up-to-date model is a job any householder can complete in an afternoon. No major plumbing work is involved.

Basic installation tips can be found at http://www.antaforyou.com/toilet-plumbing.html

The replacement bowl fits over the existing drainpipe and floor flange. And the tank can be connected to the existing water supply pipe, even if you are replacing an ancient wall-mounted tank with a modern toilet that has the tank mounted on the rear of the bowl. Water-saving models, built with lower tanks and narrower bowl traps to release about a third less water at each flush, are installed in exactly the same way as the conventional type.

The only critical factor in buying a new toilet is the so-called “rough-in distance” from the wall behind the toilet to the center of the drainpipe. This is a simple measurement but be sure to make it carefully; your plumbing supplier will need it to provide a new toilet that will fit into the same space as the one you remove.

The internal mechanisms of the new tank will already be installed and you will also get the necessary washers, gaskets and hardware for fitting the tank to the bowl. You may need to buy hold-down bolts, for securing the tank to the floor; ask your supplier. Also, buy a new wax gasket for sealing the bowl to the drainpipe, and a small can of bowl-setting compound to make a watertight seal between bowl and floor.

You will probably need to reroute the water supply pipe to connect it to the tank. This is easily done with flexible connecting pipe. But be sure to ask for a toilet-tank supply pipe; its fittings are different from those for a sink or lavatory. If the old toilet did not have a shutoff valve, now is the time to buy and install one

The job requires only a few tools: a spud wrench (or, if you do not have one, a large pipe or monkey wrench), screwdriver, carpenter’s level, tape measure and putty knife.

You can read more about it on http://www.antaforyou.com

Our Plumber put step by step installation instractions, if you have any question please send request by e-mail or call, Plumber will help you and assist right on the same time

Computer have soared high either for office, personal and for work at home purposes. Work at home is said to be the new age mantra of success. Work at home enthusiasts declare that online businesses like internet marketing are the greatest money-spinners in this tech age. The advantages of work at home are the freedom from commuting, flexibility of timing, and the fact that you can be your own boss.

For people working at home, computer or laptop is a must, and for some, both should come handy and function at its best always. But computers are machines and from time to time they need maintenance check ups. All of us have experienced some problem or the other with our desktops and laptops. While all of us would like to fix the problems ourselves, it is not always possible.

One needs to understand the problem before it can be fixed. It is always important to choose a computer services company with extreme care as you might want their service for IT consulting and computer repair. For computer service in Kansas, you can count on Computer Repair Kansas City Area for all your computer service needs.

Whatever might be the problem, no computer user can survive without the help of a good computer support. With all of these, Computer Repair Kansas City Area is work at home people’s computer service provider of choice.